1. Before you paste the wall Wallpaper, the upper part of peel from incrustations of whitewashing (abelow). Also make sure that all the Windows in the house closed. Ventilate the area will be possible only when the Wallpaper will completely dry out.
2. To start pasting better from the window, otherwise, the seam will be visible, which is not good.
Not necessary to glue the Wallpaper to the walls, jammed putty on the alabaster. The Wallpaper will still lag behind, and the putty will collapse. Better before pasting slightly proolifit walls and let them dry.
3. There is an interesting method of repair of Wallpapers. The damage needs to be attached to a piece of fresh Wallpaper to figure exactly coincided. Then blade or razor blade to cut through both layers. The bottom pull out and adapt a new piece. After that, the repair site will be almost imperceptible.
4. Before you glue the Wallpaper, the walls should be cleaned from dirt and dust - wipe with a cloth and then preferably be vacuumed.
5. You should not put Wallpaper vacant hole in a concrete wall. Lay it plain button. Using a small magnet is always possible to find an old hole, to drill a new one.
6. On the upper part of the wall - strip width of 10-15 cm, - as you know, the Wallpaper does not paste - its bleach. But how to make whitewash dripping abroad frieze - so call this band?
Glue on the bottom edge of the frieze strip of paper and boldly proceed to whitewash. Once it dries, remove paper tape - border frieze will be smooth, and the walls - without abelow.
7.Swellings on the Wallpaper removed, if after drying ironed them slightly heated iron.
According to the materials online
No comments:
Post a Comment