Repair laminate

Any floor covering, over time, wears out, so occasionally it is necessary to carry out restoration work or to perform the repair laminate. This material has nowadays a huge popularity because of their performance and attractive appearance. Produced laminate different types and sizes, but even the most durable material needs periodic maintenance. This article describes some methods of repair laminate, allowing to restore him to his original form.



What made?


Is the laminate of synthetic materials, but while he may look like a natural wooden floor. Unlike the latter, it is more easy to clean - does not require oiling, waxing or coloring. The laminate has a relatively high strength and resistance to the formation of dents. Such materials can have high resistance, so you can use them in bathrooms and kitchens. But, subject to this, any laminate flooring can be damaged, and therefore consider the problems most frequently encountered.





Scratch


Small scratches are the most common problem. Their appearance can lead dust and sand, sharp heels and other reasons. Easily and quickly to rectify the situation in this case will help waxy pencils. They are sold in specialty stores and can be of different shades, so you can choose them in the exact tone of the flooring. Before applying the floor must be cleaned from dust and dirt. Then the pencil is carried out on the scrape and Polish this place clean, dry cloth.




Deep scratches often occur because of the movement of furniture or the use of a wheeled furniture legs. Corrected these defects with a special putty. Place near scraped thoroughly clean and evenly applied putty with a putty knife. The excess putty is removed with a damp cloth and then wipe the surface of the laminate with a soft, dry cloth. The area of the repair must be left untouched for at least a couple of hours.





Irregularities


Sometimes laminate floors become uneven. This may be due to changes in temperature, humidity or other weather conditions. Also, it could be insufficient technological gap when laying laminate flooring. The solution to this problem is the reduction of tension panels, i.e. the increase of free space for expansion. You can restore the previous level of the floor covering by removing shims between the floor of the room and laminated floor. If the problem persists, then you need to remove the one closest to the wall panel and cut about 10 cm and return it.





Spots


Sometimes you want to clean laminate flooring from stains, resulting from spilled paint or melted wax. If you carry out the procedure correctly, the laminate may encounter blue traces. As soon as the substance has got on the laminate floor, it is necessary to remove the wax gently soskrebajut, and paint can be removed using means for removing nail Polish from nails.

Source:

DIY

women's web magazine