Creating covered in a patchwork

Patchwork bedspread decorate your home, give it a unique color. The blanket is easy to make, and it will be for many years to please you. So if you have a house there are any scraps, pieces of fabric left over from sewing clothes), can be used to create covered in a patchwork.


For example, consider a product with dimensions h mm





You will need:


- Cloth dense fabric h mm is Better to take a high-quality polyester, if you take natural fabrics, be sure to spend decterov


- Flap h - 60 pieces


- Padding (padding) h mm


- Sewing thread in two colors: the color of the cloth and the color of the light or the leading flap


- Needles and pins sewing


Machine sewing household or industrial line stitch





The stages


Check for unnecessary pieces of fabric, how well do the scribbling your machine, if not, adjust the tension of the thread.




Make sure that the needle number corresponds to the thickness of the thread. Needle and thread must also meet the requirements of the thickness of the fabric.




Two flap of different colors put a face to the inside and sew along one side of 15 mm from the edge.




Alternating colors, alternately grind down the flaps, as you will not get a band of six pieces. Thus, create 10 bands.




Razutyuzhte all seams.




Chips pins seams, fold the two strips, right sides inside: rags should be placed in a checkerboard pattern. Sew on 15 mm




Similarly connect all the bands prior to the formation of the entire canvas.




Razutyuzhte seams.




Apply the fabric to the padding wrong side, so that all the exposed edges of the padding were equal. Kill the materials of the pins.




The next step is to protegat materials. Stitch can be hand or machine. In the first case, to perform way better after connecting with the bottom panel, the second (we consider now) - stitch is done at this stage.




Route lines on the joints flaps, accurately hitting a seam. Don't forget the reverse stitching at the edges.




Necessarily a good spread patchwork fabric in order to avoid folds and wrinkles.




Ready quilted item put on the bottom panel (wrong side to wrong side), all exposed edges must be strictly the same.




Kill it with a pin, do the basting.




All four cut bottom panels fold on the wrong side (15 mm). Cover fabric (fix bent edge).




To perform the second bending the bottom of the cloth on the wrong side of two opposite sides, aligning the edge of the first bending and the line attaching the upper panel (located at a distance of 15 mm from the edge).




Cover and prostrochite fabric.




Follow the same procedure for the two remaining slices.




Manually hem holes in the sides, formed as a result of the last operation.

Source:

DIY

women's web magazine