As you know, children do not have bad weather and puddles so generally cause indescribable delight. We decided to pick up the kids these rubber boots that my feet will be comfortable, and most importantly dry.Model number rubber boots of most manufacturers begins with a rather large size - 22 - 23. And this is no accident. Rubber shoes are not intended for long walks. Wear it should be no more than 2 hours, otherwise there is the greenhouse effect, which can lead to the development of fungal infection. Dentists highly recommend to buy rubber boots for children up to 3 years. But there are times when they just can not do. Therefore, up to 3 years of age choose boots with the compacted heel and a small heel. And if you have orthopedic problems, be sure to insert a special insole.
For greater comfort of the baby, choose boots that have a special rear eyelet or side "handles" attached to the tops. Thus, the baby will be easier to pull colored boot on the foot, especially if he has a wide foot or high arches.
Membrane boots
Made using the newest technologies. Advantages: these boots exceptionally breathable and waterproof. Upper material: textile, inside the membrane, lining: fur or wool with synthetics. Boots on the membrane is light and does not require a woolen sock. All seams glued, and street moisture to get inside.
This shoes are from November to April, it is considered off-season, i.e. in the category of "autumn-winter". Essentially you buy two boots in one - and winter, spring and autumn. Shoes on the membrane is designed for temperatures down to -10, and at lower temperatures it is frosted over.
Care:
Don't forget that demi-season footwear needs special care. Your helpers - water-repellent sprays or creams. But to apply them should be in the evening, but not before going out on the street. Membrane shoes rinse under the tap. In any case, do not dry it on the radiator or the heater, otherwise you will destroy the properties of the membrane.
Snowboots
Ideal for the spring walks. This is a very warm rubber boots, almost boots. Snowboots three-layer: the top layer is made from a durable breathable polypropylene, the middle of a breathable and waterproof membrane, and the third is already natural wool felt. The role insulation plays a special metalized foil, reflecting the cold. Internal wool "boots" is removed. That is why nobody are considered out-of-season shoes with temperature control 5/-20. And yet these joint boots - a good option for shallow puddles and wet snow. Unfortunately, when intensive exposure to water they can get wet, primarily in the interface between rubber and textiles. So baby, for which, the deeper the pool, the more interesting, better still shod in rubber boots.
Care:
After the walk you should expose your shoes to air out. Wool walking socks, as well as the "sock"-insert wash daily: Wednesday inside of such footwear is ideal for breeding all sorts of hostile microorganisms.
Rubber Paradise
A pledge of comfort and safety of the child the correct form of rubber boots. The toe and heel should be more dense. Otherwise the boots quickly deformed, and they simply will not be able to walk. The sole is quite thick, but soft and flexible. "Stone", stiff sole will impede the natural movement of the feet of your baby, it will constantly stumble and fall. Deep, clear protector with corrugated surface will keep the baby, even on slippery surfaces.
By itself, the rubber is not heating the material. It is therefore necessary that the inside of the boot was "sock"-box of hygroscopic materials (wool, linen, fleece). Some boots have only knitted lining - they are perfect for the summer puddles and warm-season. Insulated boots with fur are designed for slush late autumn and early spring.
For the leg kid was convenient, when buying keep in mind 3 important factors:
Length
Check the child's leg on a piece of paper and gently circle. Take the tape the length of the foot. Take this picture with you to the store and give the consultant, even if the child is with you. The optimal size is between when the toe of his Shoe and the baby's fingers remained 1-1, 5 cm (finger of an adult).
Empty space creates a warming effect. Shoes end-to-end limits the slide, the fingers are compressed, the blood circulation is disturbed, and leg freezes.
Weight
Many companies manufacture shoes 3 weight: wide, medium and narrow. If
child narrow leg, do not buy shoes with a wide toe. This is very important: leg
should not hang inside the boot.
Rise
If you don't know what the baby lift, look for it on the fitting. You will not be able to put on foot the shoes even in the correct size, if the boots are too narrow transition between the foot and Shin. You have to look for other brands.
Shoes with high lift release company kotofey, Cooma, Superfit, Viking. Narrow shoes from ECCO, Ricosta, Antelope.
What kind of material?
Be sure to ask the seller what material is made by yourself boots and sole. You can find this information on the label, sole or special liner. You have the following options material: 100% natural rubber (caoutchouc) or PVC (PVC). Boots PVC differ from rubber lower weight and longer service life.
Sole boots
made from PVC or thermoplastic (TPK) is slip resistant and frost-resistant material. And if it added to the intermediate layer of foamed PVC or polyurethane, these "gum" obladaete only cushioning, and heat-shielding properties. The result is that the kids will not feel the roughness of roads and cold puddles.
Advice
- Keep in mind that between polypary rubber boots are not fixed. Therefore, when buying check the sameness of length, height, top, width and symmetry of the figure. Valid is the divergence of the parts in a pair of from 4 to 8 mm
- Hurst, with point-surface flows, the presence of spots, streaks or light whitish plaque says violations in production technology. Better pick another pair.
- Note on the bottom: it should be grooved and thickened. Than the clearer the picture, the less chance that your baby will go" through the mud. The picture must be clear. If there is greased rubber or underfilling its increased softness. This pair is at best will serve you with only one rainy season.
- Has great value way of attaching the soles to the uppers. It is the junction of the sole and Shoe upper is the most vulnerable place for moisture. Cleeve-molding method of fastening the best for wet weather. It is also called the method of liquid molding. This is when you first make the uppers, and then it is dipped in a special mold, which is directly on the Shoe molds to the sole.
- If the shoes are made by waterproof technology, on the label must be listed: Waterproof (waterproof).
- Find vivid drawings on lined or uppers, check whether they are painted.
- Try on shoes in the evening. Even the child's legs in the evening a little swollen. The shoes fit just standing!
- Want to check the quality of new clothes? Tamp rubber boots paper and place for ten minutes in a basin of water. If after the experiment the paper is not wet all right. Otherwise, the "armed" by cheque and return the shoes in the store.
Why get cold feet?
Too tight shoes - obedienee fingers freeze. Too big - no
teplosberegajushhie effect.
One hundred clothing items on legs (extra socks). Leg alternately sweating and cooled.
Tights or socks without synthetic membrane under boots. The same effect:
the membrane is not "works", the cotton had absorbed moisture, which is then cooled.
Circulatory failure (vegetative-vascular dystonia): ice (not
cool feet or hands, the warmth rushes even with hefty insulation
limbs and at home. During this disease vessels contract when you need to relax, and Vice versa. The result is a spasm and blood to the fingers just don't get it. This is normal in children under one year, a thermoregulation mechanism is still poorly established. Girls and women streched more often.
Increased suspiciousness. Typical signs: time mom gets cold outside, the means, and the baby cold.
Source:
Mommy
No comments:
Post a Comment